SOBO WP 1050F

SKU: 209 Category:

Description

AC 220-240V  4W  F.MAX:400L/H

  • The filter sponge absorbs dirt and clears the water
  • Suitable for both fresh and salt water
  • Fully submersible and ideal for any aquarium filtration

CAUTION

Always disconnect from the electrical socket before performing maintenance.

Always ensure the pump is submerged in water.

Do not lift the pump unit by pulling the wire (Power Cord).

The power supply cord provided for this appliance cannot be replaced.

PERFORMANCE

A clogged or dirty intake screen will generally reduce the performance of the pump. Hence, you must wash away the surrounded debris frequently. If less flow is required, adjust the flow control lever.

MAINTENANCE

Remove the front cover ant the impeller cover, followed by the impeller unit. Use a small brush to clean the cylinder or just wash away the debris under running water.

REMINDER: If the pump fails to operate, check the following:

Check and ensure there is a consistent power supply to the pump unit.

NOTE:

Performing regular maintenance can prolong the life span of the pump. During installation, ensure the power plug of the pump is inserted to the power socket outlet the higher point.

This is to ensure that water will not back flow via the wire to the socket outlet.